Feed aggregator

The MINIX Elite EU715-AI is a compact mini PC based on Intel’s Meteor Lake-H processor architecture. It features integrated Intel Arc Graphics, Wi-Fi 6E, dual 2.5G Ethernet ports, and quad-screen display support. The system runs Windows 11 Pro and comes equipped with 32 GB of DDR5 SO-DIMM memory, configured as two 16 GB modules. For […]

AnalogLamb has introduced three new RISC-V development boards based on the ESP32-C6, designed for low-cost, full-function, and low-power IoT applications. These boards feature Espressif’s first Wi-Fi 6 SoC, integrating Wi-Fi 6 (2.4 GHz), Bluetooth 5 LE, and IEEE 802.15.4 protocols. Each board is built around the ESP32-C6-WROOM-1 module, which combines a high-performance 32-bit RISC-V core […]

Minisforum recently introduced the MS-A2, a compact workstation featuring high-end AMD processors, support for up to 96GB of memory, and flexible storage options. It offers PCIe expansion, triple 8K display output, and fast wired and wireless connectivity, targeting users who need strong performance in a small footprint. The MS-A2 is a compact computing platform built […]

Zalmotek expands its Feather System on Module portfolio with high-performance options designed for advanced embedded systems. These modules are based on Renesas processors and follow the Feather form factor, enabling flexibility for robotics, industrial control, and edge computing applications. The RA6M1 Feather SoM features an Arm Cortex-M4 CPU operating at up to 120 MHz, paired […]

The NUCLEO-WBA65RI is a wireless STM32 Nucleo-64 development board built around the STM32WBA65RIV7 microcontroller. It combines the MB2130 MCU RF board with the MB1801 mezzanine board to support Bluetooth LE and IEEE 802.15.4-based protocols such as Thread, Matter, and Zigbee. The STM32WBA65RIV7 microcontroller is a 32-bit Arm Cortex-M33 device featuring 2 MB of flash and […]

The Beetle RP2350 is a coin-sized development board designed for space-constrained embedded projects. Despite its compact 25 × 20.5 mm footprint, it offers a wide range of hardware features and low power consumption, enabling its use in portable devices such as retro computers, game consoles, lighting controllers, and electronic badges. This board is built around […]

Zalmotek offers a range of Feather SoMs built around Renesas microcontrollers, targeting energy-efficient and compact embedded applications. These modules follow the Adafruit Feather form factor and include essential interfaces for rapid prototyping and deployment in IoT and low-power scenarios. The RA0E1 Feather SoM is designed for ultra-low-power use cases. It features an Arm Cortex-M23 CPU […]

MicroPython has reached a major milestone with the release of version 1.25.0, delivering significant enhancements after over three years of development. This update introduces the long-anticipated ROMFS (Read-Only Memory File System), new processor support, TLS improvements, and expanded board compatibility across multiple architectures. One of the most notable additions is ROMFS, a read-only, memory-mappable, extensible […]

The ASUS NUC 15 Pro, also known as Cyber Canyon, is a compact mini PC built for professional computing needs. Available in Slim and Tall versions, it features Intel Core Ultra processors and Intel Arc Graphics, offering strong performance and flexible connectivity. Cyber Canyon integrates the latest Intel Core Series 2 Ultra processors with hybrid […]

The April 18th update of DietPi v9.12 introduces new software options including the fish shell and Amiberry v7/Amiberry-Lite, while also expanding compatibility and resolving various issues. This release focuses on improving usability, editor flexibility, and hardware support across platforms.   DietPi: DietPi is a lightweight, Debian-based operating system optimized for single-board computers and embedded systems. […]

The Radxa Dual 2.5G Router HAT adds high-speed networking and NVMe storage expansion to single-board computers like the Raspberry Pi 5 and Radxa ROCK series, using a single PCIe connection in a compact form factor. The HAT uses the ASM2806 PCIe Gen3 switch chip to convert a single PCIe lane into multiple downstream lanes. This […]

The Atomic DTU LoRaWAN Base is a compact, programmable unit for low-power, long-range IoT communication. Based on the STM32WLE5CC chip, it supports LoRaWAN Class A, B, and C modes and comes in US915, EU868, and CN470 variants to meet regional frequency standards. Each module supports both LoRaWAN and LoRa P2P modes, allowing for deployment either […]

The Minichord is a compact, chord-focused musical instrument developed by Benjamin Poilve through a co-creation effort with Seeed Studio. Designed for musicians of all skill levels, it combines a tactile chord selection system with a responsive touch interface and MIDI output capabilities. With fully open-source firmware and hardware design, the device encourages community-driven modification and […]

Banana Pi has introduced the BPI-RV2, an open-source gateway platform developed in collaboration with Siflower. The board is based on the SF21H8898 SoC, a quad-core RISC-V processor designed for industrial and enterprise networking applications such as routers, access points, and control gateways. The Siflower SF21H8898 is built using TSMC’s 12nm FFC process and integrates a […]

Cerebro is an upcoming clusterboard platform launching on Kickstarter, designed for AI, edge computing, and embedded development. It supports a range of compute modules including Raspberry Pi CM4 and CM5, NVIDIA Jetson, and Radxa CM5, providing a modular base for scalable systems. The board can host up to four compute nodes and includes an onboard, […]

Armbian has expanded its support for cloud infrastructure with a new line of dedicated cloud images designed for generic x86 and aarch64 platforms. These images are tailored for performance, efficiency, and streamlined deployment in virtualized and cloud-native environments. The new Armbian cloud image set aims to meet the growing demand for lightweight and reliable Linux […]

The Metis Compute Board is a compact single-board computer designed for AI applications requiring high computational performance at the edge. Built around the ARM-based RK3588 processor, it integrates the Metis AIPU for AI acceleration and features up to 16 GB of RAM, dual Gigabit Ethernet ports, and GPIO support. The board incorporates the Rockchip RK3588 […]

Renesas Electronics has introduced the RZ/V2N Evaluation Kit, a platform for developing embedded systems with on-device AI. Built around the RZ/V2N microprocessor, it combines an AI accelerator, image signal processor, and security features for vision-based edge applications. The evaluation platform includes two boards: the RTK0EF0186C02000BJ main board and the RTK0EF0168B00000BJ expansion board. The main board […]

The NanoCluster is a compact computing platform designed for multi-SOM configurations, offering a balance between size and functionality. It supports up to seven system-on-modules, including the LM3H, CM4, CM5, and M4N, making it adaptable for various applications requiring distributed computing. With dimensions of 85x56mm, the board is significantly smaller than a standard mini-ITX board, occupying […]

Sony Electronics has introduced the AS-DT1, a miniature LiDAR depth sensor targeting applications with strict space and weight constraints. Measuring 29mm x 29mm x 31mm and weighing 50g, it is described as the world’s smallest and lightest LiDAR sensor in its class. The AS-DT1 is built on Sony’s proprietary Direct Time of Flight LiDAR technology. […]